Skip to main content
Address
Mainstreet 1234
12346 Anytown, UK
Follow Us
CLASSIC
Products of CLASSIC line are suitable with systems that use HFC and HFO refrigerants
(Group 2, A1 safety group ASHRAE)
You can install CLASSIC range inside all systems that still use R22 and HFC refrigerants or for maintenance of old systems.
Capacity regulators, CLASSIC line
产品
Capacity regulators, classic line
In refrigeration and air conditioning systems, it is preferable to limit the minimum evaporation pressure during periods of reduced load. Capacity regulators are a solution to these problems as they a...
阅读更多
Start pressure regulators, CLASSIC line
产品
Start pressure regulators, classic line
These are regulators commonly used in low-temperature refrigeration systems. They are designed to prevent the compressor motor from overloading when the intake pressure exceeds the manufacturer’s reco...
阅读更多
Evaporator pressure regulators, CLASSIC line
产品
Evaporator pressure regulators, classic line
These are regulators designed to maintain a constant evaporating pressure and thereby a constant surface temperature on the evaporator under varying evaporator loads. This regulator prevents too low e...
阅读更多
Condensing pressure regulators, CLASSIC line
产品
Condensing pressure regulators, classic line
These pressure regulators are designed to limit the liquid flow rate from the condenser to the liquid receiver tank, effectively reducing the exchange surface of the condenser and increasing the conde...
阅读更多
Liquid receiver tank pressure regulators, CLASSIC line
产品
Liquid receiver tank pressure regulators, classic line
These regulators are used with condensing pressure regulators, instead of differential valves. Together, these valves form a control system that maintains constant condenser and liquid receiver tank p...
阅读更多
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.